Installation products

VETA France offers you all the products
and accessories required for installing VETAbric panels

>>Download the installation products catalogue
 

SDF-S 8 Wall plug and screw with a countersunk head
for solid supports

With Torx T30 zinc-plated steel screw
Fastening depth: hv = 50 mm
Wall plug diameter: 8 mm

SDF-S 8 UB Wall plug and screw with a countersunk head for hollow or dubious supports
With Torx T30 zinc-plated steel screw
Fastening depth: hv = 70 mm
Wall plug diameter: 8 mm

SDP-S Plus 8 Wall plug and screw with a countersunk head honeycomb concrete, Poroton, etc.
With Torx T30 zinc-plated steel screw
Fastening depth: hv = 110 mm
Wall plug diameter: 8 mm

FM-X5 Wall plug and special screw with a countersunk head
Wall plug diameter: 8 mm
Wall plug diameter: 10 mm

SDF-S 10 H Wall plug and screw with a countersunk head for hollow or dubious supports
European Technical Approval: ETA-10/0305
Anchoring depth: 70 mm
Wall plug diameter: 10 mm

SDF-S 10 V Wall plug and screw with a countersunk head for solid supports
European Technical Approval: ETA-10/0305
Concrete anchoring depth: 40 mm
Solid masonry: 50 mm
Wall plug diameter: 10 mm

VBU/ZBJ Self-drilling screw with a countersunk head for wooden support
Torx T25 bichromate zinc-plated steel screw
Screw diameter: 6 mm

JT2-ST-2-6 Self-tapping screw with a countersunk head for steel or aluminium support
Torx T25 zinc-plated steel screw with a Climadur coating
Screw diameter: 6 mm

JZ3-S 6.3 Self-tapping screw with a countersunk head for steel or aluminium support
Torx T30 screw made from stainless steel
Screw diameter: 6.3 mm

Wall plug/nail for hammering in
For fastening insulation before fitting the prefabricated cladding
Nail diameter: 8 mm
Wall plug diameter: 10 mm

Polyamide conical washer
To be placed under screw heads

Wall plug for hammering in
for installing aluminium sections
Anchoring depth: ≥ 30 mm

Fitting for screwing
Torx T30 fitting
Length 25
Length 30

ALUDEP start section
15/10e

ALUAR side end section 10/10e

ALUANGD corner section 10/10e

ALUANGB corner section 10/10e

ALUTP224 covering section 10/10e

ALUTP233 covering section 10/10e

Grout with a rustic appearance Large particles 6K

Grout with medium-sized particles

Grout with fine particles

MASTPU polyurethane filler
Used for connecting corner panels
without rebates and cutaways
310 ml tube

MASTSI silicon filler
310 ml, 0.50 kg tube

MOUSPU polyurethane foam spraycan
(can be attached to a spray gun)

CERMINET professional cement cleaner
1 l or 5 l drum

Kitajoint (consisting of a duckboard tray, a grout float and a foam float)
KITAJ full Kitajoint (2.6 kg)
TALJ grout float (black) (0.3 kg)
TALMOH water foam float (yellow) (0.5 kg)
PRTALM press for pressing the foam float (1 kg)

Pavillon

Renovate, embellish
and insulate your façade or house front externally

imgresReady to install brick
facings delivered!


Private individuals access

 

VETA France: A French manufacturer of brick panels for renovating and insulating façades and house fronts from the outside.

©2020 VETA France