Cité du Cinéma (St Denis) Surface area: 3,300 m²
LE HAVRE, architecte cabinet QUATRE PLUS Paris - 1000m²
BARENTIN 33logts, Architect ATELIER DU CAP Cany-Barville - 1000m²
WASQUEHAL (Renovation of a restaurant in Lille), Architect POPIEUL Bruno LILLE
Nord region
Le Havre, Habitat 76 , Architect CBA (Rouen) - 1600m²
Nord region
Montreuil sous Bois, Bouygues Immobilier - 2200m²
Nord region
NANTERRE APOLLONIA - 1200m²
LE MANS (Résidence Val d'Huine) - 10 000m²
CHANTELOUP LES VIGNES - 1800m²
MANTES LA JOLIE - 5300m²


VETAbric:
The SLIMLINE brick facing panel
which can be adapted to any type of insulation
that meets architectural, economic and environmental constraints.

The VERY FINE brick facing panel

Structure of the brick panels

Frame plate

The frame plate features polyurethane expanded in water in a mould in the same format as the prefabricated facing pieces.

The facing bricks are laid out in the bottom of the mould, with the foam being poured over the top of them.

  • Density: 210 kg/m3
  • Percentage of closed cells greater than 90%
  • Breaking strength :
    • Tensile strength : > 0,2 MPa (as per EN 1607)
    • Compression strength : 1 MPa (as per NF EN 826)
  • Dimensional variations : 0.28% in terms of thickness and 0.09% in terms of length and width (as per EN 1604)
  • Water absorption : <1% (as per EN 12865)
  • Thermal resistance : 0.29M²K/W

Additional insulation for the external insulation configuration

  • For prefabricated cladding: Rigid insulation varying from 20 to 180 mm, with the EC Standard mark and ACERMI certification corresponding to minimum iSole ranking: I3 S1 O2 L2 E1.
  • For add-on cladding: Semi-rigid insulation complying with CSTB Specifications Standard 3316 and 3585 V2.

 

The brick facing panel

The VETAbric system is a complete system featuring standard or special (corner piece) prefabricated cladding panels, mechanical fastenings, start sections and finishing sections, polyurethane filler, and grout.

The standard panels, the measurements of which are 1,044 x 462 mm, 1,024 x 462 mm, 928 x 462 mm and 908 x 462 mm, with a thickness of 25 mm, consist of a facing featuring terracotta bricks set in a thin layer of polyurethane.

In between the facing bricks is concave silica-based grouting.

The weight of a standard panel is approximately 12.5 kg, depending on the facing.

The panels feature a rebate that runs horizontally in the case of panels with straight grouting, and horizontally and vertically in the case of panels with offset grouting.

DCorner panels are manufactured by mitered cutting of flat panels. They are assembled using a special gluing process. A full range enables façade corners, openings, or any special points to be handled. Other customised corner pieces may be created depending on the cornicing to be created.

 

Pavillon

Renovate, embellish
and insulate your façade or house front externally

imgresReady to install brick
facings delivered!


Private individuals access

 

VETA France: A French manufacturer of brick panels for renovating and insulating façades and house fronts from the outside.

©2021 VETA France